Table of Contents
Advertisement
Operation Manual
4. Mounting / Installation
Scope of Supply
Please check immediately after receiving the valve,
if the content is matching with the specified scope
of supply. The delivery includes:
•
valve
•
operation manual
The central connector assembly as well as the
parametrizing cable has to be ordered separately
and are not included in the delivery.
Please check the delivery immediately after
receiving the shipment for apparent damages
due to shipping. Report shipment losses at
once to the carrier, the insurance company
and the supplier!
Available bolt kits
Valve type
RE06M*T
RE10M*T/R4V03
RE25M*T/R4V06
RE32M*T/R4V10
RE10R*T/R6V03
RE25R*T/R6V06
RE32R*T/R6V10
RE16E*T
RE25E*T
RE32E*T
RE40E*T
RE50E*T
RE63E*T
R5V
Insufficient condition of the valve mounting
surface migth create malfunction!
Incorrect mounting resp. bolt torque may
result in abrupt leakage of hydraulic fluid on
the valve ports.
* The dimension of the screws resp. tie rods
depends on the used SAE flanges and on the
number of SAE valves.
RE_-R_V obe_24-45-A-B 5715-651 UK 29.01.19
Bolt dimensions
4 pcs. M5x30 mm
4 pcs. M10x35 mm
4 pcs. M10x45 mm
6 pcs. M10x45 mm
4 pcs. M12x45 mm
4 pcs. M16x70 mm
4 pcs. M18x75 mm
4 pcs. M8x40 mm
4 pcs. M12x50 mm
4 pcs. M16x55 mm
4 pcs. M20x70 mm
4 pcs. M20x75 mm
4 pcs. M30x100 mm
*
Proportional Pressure Valves
Series RE*T / R*V
Mounting
•
Compare valve type (located on the name plate)
with part list resp. circuit diagram.
•
The valve may be mounted fix or movable in
any direction.
•
Verify the mounting surface for the valve. Une-
veness of 0.01 mm/100 mm, surface finish of
6.3 µm are tolerable values.
Keep clean valve mounting surface and work
environment!
•
Remove protection plate from the valve moun-
ting surface
•
Check the proper position of the valve ports
and the O-rings.
•
Mounting bolts:
use property class ISO 4762-12.9
•
Tighten the bolts crisscross with the following
torque values acc. to table below
Torque value
7.6 Nm
63 Nm
63 Nm
63 Nm
108 Nm
264 Nm
398 Nm
31.8 Nm
108 Nm
264 Nm
517 Nm
517 Nm
1775 Nm
*
Operation Limits
The valve may be operated within the determined
limits only. Please refer to the "technical data"
section as well as to the "characteristic curves" in
the catalog.
Follow the environmental conditions! Unallo-
wable temperatures, shock load, aggresive
chemicals exposure, radiation exposure,
illegal electromagnetic emissions may result
in operating trouble and may lead to failure!
Follow the operating limits listed in the "spe-
cifications" table!
12
Parker Hannifin Corporation
Ordering number
BK375
BK505
BK485
BK506
BK494
BK366
BK507
BK414
BK391
BK415
BK416
BK417
BK418
*
Advertisement
Table of Contents
