Advertisement
10. Additional outdoor transmitters
• For having more than one additional outdoor transmitter select with the 1/2/3 switch in the battery
compartment of the outdoor transmitter for each single outdoor transmitter a different channel. The
reception of the new transmitter will be transmitted automatically to the receiver. Press and hold the
button on the receiver or restart the receiver according to the manual.
• The outdoor values will be shown on the display of the receiver. If you have installed more than one
outdoor transmitter, press the
• You can also choose an alternating channel display. After the third channel, press the
again, the numbers and temperature value of each channel will cycle display .
• Press the
button again to deactivate the alternating channel and the first outdoor transmitter
will be shown permanently.
• Once registered outdoor transmitters (channels),which are no longer needed,can be deleted manually
by pressing the
will be another indicator.
Note:
1.Each channel can be individually registered.(e.g.:hold
channel 1, then channel 1 will deleted and re-register,channel 2 and 3 no changed).
2.After change the batteries of registered outdoor transmitters, it need hold
three seconds to re-register the transmitter.
button on the receiver to change between the channels 1 to 3.
button for three seconds.Once a new outdoor transmitter is received, there
button for three seconds in
-12-
button
button for
Advertisement
