Advertisement
The screen shows
strange colors or just
black and white.
The screen suddenly
has become
unbalanced.
The screen is out of
focus.
There are only 16
colors shown on the
screen.
The screen colors
have changed after
changing the video
card.
There is a message
that reads
"Unrecognized
monitor, Plug & Play
(VESA DDC) monitor
found".
Check when
MagicTune™ does not
function properly.
MagicTune™ doesn't
Is the monitor
connected using the
DVI cable?
Is the screen
displaying only one
color as if looking at
the screen through a
cellophane paper?
Have the screen colors
become strange after
running a program or
due to a crash
between applications?
Has the video card
been set properly?
Have you changed the
video card or the
driver?
Have you adjusted the
resolution or frequency
to the monitor?
The screen can be unbalanced due to the cycle of the video card signals.
Readjust position by referring to the MagicTune™ program.
Have you adjusted the
resolution or frequency
on the monitor?
Have the Windows
colors been set
properly?
Has the video card
been set properly?
Have you installed the
monitor driver?
See the video card
manual to see if the
Plug & Play (VESA
DDC) function can be
supported.
MagicTune™ feature
is found only on PC
(VGA) with Window
OS that supports Plug
and Play.
Have you changed
some keys on the keyboard.
You may get a blank screen if you boot the
system before you connect the DVI cable, or
disconnect and then reconnect the DVI cable
while the system is running as certain types of
graphic cards do not send out video signals.
Connect the DVI cable and then reboot the
system.
Check the signal cable connection. Make sure
the video card is fully inserted in it's slot.
Reboot the computer.
Set the video card by referring to the video card
manual.
Adjust screen image position and size using the
MagicTune™ program.
Adjust the resolution and frequency at the video
card.
(Refer to the
Preset Timing
Adjust the resolution and frequency of the video
card.
(Refer to the
Preset Timing
Windows ME/2000/XP:
Set the colors properly at the Control Panel →
Display → Settings.
Set the video card by referring to the video card
manual.
Install the monitor driver according to the
Installation
Instructions.
* To check whether your PC is available for
MagicTune™ feature, follow the
steps below (When Windows is XP);
Control Panel -> Performance and Maintenance -
> System -> Hardware -> Device Manager ->
Monitors -> After deleting Plug and Play monitor,
find 'Plug and Play monitor' by searching new
Hardware.
MagicTune™ is an additional software for the
monitor. Some graphic cards may not support
your monitor. When you have a problem with the
graphic card, visit our website to check the
compatible graphic card list provided.
http://www.samsung.com/monitor/magictune
Download the latest program. The program can
Modes).
Modes).
Driver
Advertisement
