Self-Test Feature Check - Samsung SyncMaster 2032MW User Manual

Self-Test Feature Check

Check the following items yourself before calling for service. Contact the
problems that you cannot solve by yourself.
Self-Test Feature Check | Not Optimum Mode
Maintenance and Cleaning
1. Self-Test Feature Check
Your monitor provides a self test feature that allows you to check whether your monitor is functioning
properly.
1. Turn off both your computer and the monitor.
2. Unplug the video cable from the back of the computer.
3. Turn on the monitor.
The figure shown below ("Check Signal Cable") appears on a black background when the monitor is
in its normal working condition though it does not sense any video signal: While in the Self-Test
mode, the LED power indicator remains green and the figure moves around on the screen.
4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the
monitor.
If your monitor screen remains blank after using the previous procedure, check your video controller and
computer system; your monitor is functioning properly.
2. Not Optimum Mode
If the vertical resolution is not optimum mode, you can still see the display but the warning message below
appears and disappears after one minute.
The user must adjust the frequency within that one minute.
Refer to Specifications >
| Display Adapter Driver
| Symptoms & Recommended Actions
Preset Timing Modes
SyncMaster 932MW
for the resolutions or frequencies that are
service center for