Samsung SyncMaster 2032MW User Manual page 14

(The configuration at the back of the monitor may vary from product to product.)
1. POWER
2. DVI/PC IN / HDMI/PC/DVI-D AUDIO IN
3. COMPONENT IN
4. ANT IN
Power terminal
Connect the power cord for your monitor to the
POWER on the back of the monitor.
This product may be used with 100 ~ 240VAC(+/-
10%).
1. PC
: Connect the signal cable to the PC port on the
back of your monitor.
2. DVI-D
: Connect the DVI cable to the DVI-D port on the
back of your monitor.
3. HDMI/PC/DVI-D AUDIO IN
: Connect the HDMI/PC/DVI-D AUDIO IN terminal at
the back of your monitor to your computer's sound
card.
1. R - AUDIO - L
: Connect the port of the DVD, VCR (DVD / DTV
Set-Top Box) to the R-AUDIO-L port of the monitor.
2. P , P ,Y
R B
: Connect the VIDEO OUT port of the DVD / DTV
Set-Top Box to the P , P
R
component cable (P , P
R
,Y input ports using a
B
,Y).
B