Table of Contents
Advertisement
■
N
o
N
o
■
C
a
C
a
Manual
3-8
Step 2. Configuring the digital sound output on the computer
Press <Fn>+<
> to output the audio signal through the S/PDIF port.
The S/PDIF setting also can be changed in the Sound and Audio Device prop-
t
e
t
e
erties. (Click Start > Control Panel > Sounds, speech, and Audio Devices >
Sounds and Audio Devices.) However, <Fn>+<
Step 3. Enable S/PDIF in the DVD program
When using 5.1 channel speakers, you need to install the Power DVD
program from the DVD Installation CD separately supplied and then
change the settings as directed in these steps:
1. Run Power DVD and click the Settings button.
2. On the Audio tab, set the Speaker Environment setting to "Use SPDIF"
and click OK.
Now, you can enjoy home theater using DVD titles.
u
t
i
o
n
u
t
i
o
n
To control volumes for your 5.1 channel speaker, use the control on the
digital amp. (Please, refer to the speaker manual.)
> keys have priority.
Advertisement
Table of Contents
