Connecting To An Access Point (Ap) - Samsung NX10 User Manual

Connecting to an Access Point (AP)

This section describes how to connect to an AP. You can use the network when you are
connected to an AP.
In this section, the configuration procedures are described for Windows XP
installed computers. For information on the configuration procedures for other
operating systems, see "Using Wireless Networks in Other Operating
Systems" on page 33. Please ask your network administrator about detailed
configuration information such as the network key (encryption key).
1. Right-click on the Wireless Network Connection (
select View Available Wireless Networks.
2. Select your desired AP (e.g. Test) to connect, and enter the encryption key for the
AP in the Network key field, and click Connect.
If the network key is not configured for the desired AP, select 'Allow me to
connect to the selected wireless network, even though it is not secure'.
Now you are connected to the AP, and you can access the network.
) icon on the taskbar, and
Connecting to the Internet 27