Changing Devices - Samsung NP10 User Manual

Using the Multi-Bays in the Docking Station
Your computer includes the docking station that holds a 5.25" and a 3.5" device in the
two multi-bays. Below is a listing of the device types you may install in your docking
station.
The default system is purchased with CD-ROM and FDD devices.
5.25" Devices:
3.50" Devices:

Changing Devices

This section will discuss changing the 5.25" and 3.5" devices.
Changing a 5.25" Device
To change from one 5.25" device to another simply follow the steps below:
5.25" Device
1. Turn off the system.
2. Detach the system from the docking station.
3. Slide the 5.25" multi-bay latch toward the middle of the multi-bay.
4. The device will pop out approximately 2cm.
5. Remove the device.
6. Insert the new 5.25" device into the multi-bay until the multi-bay latch clicks.
34 Users Manual
CD-ROM drive
CD-RW/DVD Combo
FDD
DVD-ROM drive
2nd HDD
CD/DVD-Combo