Midland X-TRA TALK GXT Series Manual page 40

When a transmission with the correct tone is received, the mute is
removed and the voice audio can be heard. When the transmission ends
the channel is muted again. Transmissions that do not have the correct
tone are not heard.
The MXT115 has 142 Privacy Codes (38 CTCSS codes and 104 DCS
codes), which can be applied to any channel. If desired, you can select
Frequency Chart and DCS Privacy Codes Chart for lists of available
Privacy Codes.
IMPORTANT! To communicate between two radios, both radios must be
set to the same channel (see Selecting the Active Channel) and Privacy
Code selections.
To select a Privacy Code:
1. Press and release the Menu
mode.
2. Use the Channel Up
the menu options until the LCD display shows Pt, then press the
Monitor/Scan
3. Use the Channel Up
privacy tone type you would like to use: for CTCSS
4.
The (for CTCSS) or
display, according to your selection
5. Use the Channel Up
backward through the available Privacy Codes until the desired Privacy
Code is shown on the LCD display.
NOTE: DCS Privacy Codes 100-104 are shown on the LCD display as
A0-A4.
NOTE: Selecting a Privacy Code of "oF" will disable the Privacy feature.
midlandusa.com
button to a place the radio in "Menu"
or Channel Down
/ button.
or Channel Down
(for DCS) icon will show on the LCD
or Channel Down
Model MXT115
CTCSS Privacy Codes
button to scroll through
button to selct the
or for DCS
button to scroll forward or
Page 19