Samsung NP-M70 User Manual page 55

Separating the LCD Panel
The procedures to separate the LCD panel from the system are described below.
1. Shut the system down and slide both the LCD separation lever latches at the
bottom of the system outwards. The LCD separation lever is released.
LCD Separation Lever Latch
2. Open the LCD panel of the system to 180 degrees and place the end of the LCD
panel on the LCD Support at the back of the cradle.
If you open the LCD panel to 180 degrees, the LCD hinge bar is adjusted to
90 degrees.
If the LCD hinge bar is not adjusted to 90 degrees, you cannot install the LCD
on the cradle.
36 Users Manual
180 Degrees
LCD Support