Connect - 4Xd And 4Xv-Series - Honeywell VARIODYN D1 Installation Instruction

Installation Instruction VARIODYN

Connect - 4XD and 4XV-series

7.6.1 Connection DOM and Power Amplifier
1. Connect the DOM with the redundant power supply of the power amplifier.
2. Connect the PA output of the control unit and the D1 LINK CONTROL INTERFACE socket of the power
amplifier with the green input cable DOM-Amplifier  (Part No. 583491A).
3. Connect the SPK OUTPUT on the power amplifier and the IN PA input of the DOM using the amplifier - DOM
grey output cable  (Part. No. 583477.21) – ensure that the correct slot is used as per the cable labelling.
Connect channels CH1/2 (left slot) and CH 3/4 (right slot) on the power amplifier 4XD125B as per the
figure below.
1
CH 1/2
Fig. 64: Connection of the inputs/outputs

Input cable DOM amplifier (0,5 m, green)  AF output signal to power amplifier (PA)

Output cable 2 amplifier - DOM
70
®
D1 System
2
2
CH 3/4
(example with 4XD125B)
DOM
PA
Part No. 583491A
Part No. 583477.21
FB 798663.GB0 / 05.19