Cleaning; Cleaning The Housing; Storage When Not In Use - Silvercrest SBDB 5 A1 Operating Instructions And Safety Instructions

Fault
Interference with the
radio reception .
No automatic
setting of time and
date .
NOTE
► If you cannot solve the problem with the solutions given above, please
contact the Service Hotline (see section Service) .

Cleaning

DANGER
Risk of fatal injury from electrocution!
► Pull out the plug of the mains adapter from the power socket before starting
to clean the device .
CAUTION
Damage to the device!
► To avoid irreparable damage to the device, ensure that no moisture can
penetrate the device during cleaning .
► Do not use caustic, abrasive or solvent­based cleaning materials .
These can damage the surfaces of the device .

Cleaning the housing

♦ Clean the surfaces of the device with a soft, dry cloth .
♦ Use a lightly moistened cloth and a mild detergent to remove stubborn dirt
residues .

Storage when not in use

♦ If you do not intend to use the device for an extended period of time,
disconnect it from the power supply, remove the batteries and store
it in a clean, dry place without exposure to direct sunlight .
■ 62 │ GB │ MT
Possible cause
Radio reception is too weak .
The RDS signal is not
available .
Remedy
Try to improve reception by moving
the screw aerial or by setting up
i
the radio in a different location .
Try to improve reception by moving
the screw aerial or by setting up
i
the radio in a different location .
SBDB 5 A1