3Com 4210G Series Getting Started Manual page 60

Hide thumbs Also See for 4210G Series:

Table of Contents

BUS Clock Speed : 33MHz

Memory Size

Mac Address

Press Ctrl-B to enter Boot Menu... 0

In normal startup mode, the waiting time here is five seconds. If you press Ctrl + B within five seconds,

the Boot Menu is displayed. If you press Ctrl + B within five seconds, the Boot Menu is displayed: If you

perform no operation or press a key other than Ctrl + B within five seconds, the system begins to

automatically start up and the following information is displayed:

Auto-booting...

Decompress Image................................................................

................................................................................

...........................................OK!

Board checking.......................LSP1LTSUD

SDRAM fast selftest........................OK!

Flash fast selftest........................OK!

CPLD selftest..............................OK!

Switch chip selftest.......................OK!

PHY selftest...............................OK!

Subslot 1 (3CRS45G-24-91) selftest.........OK!

Please check leds....................FINISHED!

User interface aux0 is available.

Press ENTER to get started.

The appearance of "Press ENTER to get started" indicates that the automatic startup of the switch is

complete.

Press Enter. The following prompt is displayed:

: 128MB

: 001cc5bc3111

4-9

Table of Contents

Show Quick Links

Table of Contents