Installing The Touchscreen Driver - Samsung SyncMaster 400TS-3 User Manual

Touchscreen

Installing the Touchscreen Driver

1. Connect the monitor to your PC using the USB cable.
2. Insert the driver installation CD into the CD-ROM drive.
3. Click "Setup IRTOUCH USB" with the mouse. The driver will run. (Double-click the file in the
"Touchscreen Driver" folder with the mouse.)
Note
If using a network box, open the "C:\ TSN3 \ IRTouch" folder on the network box.
4. After installation, reboot the PC. (If using a network box, click the "EWF" file on the desktop of
the network box to reboot the PC.)
Note
At this point, the driver has been installed and the system will automatically retrieve the driver.
However, some computers need to run the following steps to find the new driver: 5, 6, 7.
5. Choose "No, not this time," and then "Next" (FIG. 1).
6. The system tells you that you need to find the relevant driver document if the touchscreen is found.
Please choose "Install the software automatically (Recommended)" and then "Next" (FIG. 2).
Using the Software
FIG. (1)
FIG. (2)