Samsung 400TS-3 Quick Start Manual page 12

The Color button and the
PC/DVI/HDMI/DP selection
button.
TTX/MIX
MTS/DUAL
ENTER/PRE-CH
MUTE
CH/P
TV
Introduction
In TV mode, these buttons can be used to configure a list of chan-
nels.
You can select the PC, DVI, HDMI or DP(DisplayPort) external
input directly in a mode other than TV mode.
TV channels provide written information services via teletext.
- Teletext Buttons
Note
This function does not work for this LCD Display.
MTS-
You can select MTS (Multichannel Television Stereo) mode.
Audio Type
FM Stereo Mono
Stereo
SAP
DUAL-
STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM
MONO/NICAM STEREO can be operated depending on the
broadcasting type by using the DUAL button on the remote control
while watching TV.
Note
Enabled when a TV tuner box is connected.
This button is used to return to the immediately previous channel.
Note
Enabled when a TV tuner box is connected.
Pauses (mutes) the audio output temporarily. This is displayed on
the lower left corner of the screen. The audio comes back on if
MUTE or - VOL + is pressed in the Mute mode.
In TV mode, selects TV channels.
Note
Enabled when a TV tuner box is connected.
Allows you to watch an analogue or digital TV.
Note
Enabled when a TV tuner box is connected.
MTS/S_Mode Default
Mono Manual Change
Mono ↔ Stereo
Mono
Mono ↔ SAP