Combination Instrument - Sym MAXSYM 400 Manual

Combination Instrument

MAXSYM 400 (LZ40W1-EU)
○ ○
A B
The combination instrument is activated when the ignition switch is turned on. Most indicators are lit up
shortly and then go off; all LCD functions are shown for a few seconds for function test, then the whole
combination instrument turns to operational mode.
NOTE :
 Do not wipe plastic components, such as the instrument panel, the headlight, body covers, etc. with
solvents, such as gasoline. Wiping plastic components with solvents can cause damage.
WARNING:
 Never operate the instrument buttons while riding the scooter.
○ Turn Signal Indicators
A
The corresponding turn signal indicator light blinks when the turn signal switch is pushed to the right or
left.
○ EFi Warning Indicator
B
When turn the ignition switch to "ON" position, the EFi warning indicator remains on initially. It should go
off immediately after the engine is running. It displays the condition of the EFi system is working correctly.
If there is any problem on the EFi system, the warning indicator remains on all the time. Please contact
your SYM authorized dealer if this light goes on all the time.
○ Speedometer
C
The speedometer shows the current vehicle speed only in km/h. When the ignition switch is turned on, the
speedometer needle sweeps across the whole range then return to zero position for functional test.
○ M Button
D
Press this button to switch meter mode and set the clock of the multi-function meter (page 11).
○ ○
○
C D
F
○
N
○ ○
G E
9
○
M
○
○ ○
○
H
J K
I
○
L
○
A