Table of Contents
Advertisement
16
KEYS, DOORS, AND WINDOWS
button on the inside grip area of the
outside door handle. Touch the sensor
on the front outside door handle to
lock. See Keyless Access Operation in
Remote Keyless Entry (RKE) System
Operation 0 7.
Driver Door Key Lock Cylinder
Access (In Case of Dead Battery)
To access the driver door key lock
cylinder and unlatch the door:
1. Insert the mechanical key into the
slot at the bottom of the handle
and push upward all the way until
the cover frees. Do not pry or pull
on the key.
2. Remove the cover.
3. Insert the mechanical key in the
cylinder.
4. Turn the mechanical key clockwise
until it stops.
5. Slowly turn the mechanical key
counterclockwise while pulling the
handle to unlatch the door.
6. Repeat steps 4 and 5 if the door
does not fully open.
To replace the cap:
1. Align the top edge of the cover to
the handle.
2. Turn downward to snap cover into
position.
3. Check to ensure cap is fully seated.
Advertisement
Chapters
Table of Contents
