Connecting The Video Out To Tv - Samsung HT-TP33 Instruction Manual

HT-TP33
Front Speaker (L)
Front Speaker (R)
Center Speaker
Green
Red
White
Purple
Gray Blue
Subwoofer
Rear Speaker (R)
Rear Speaker (L)
Back of the Speakers
1 2
Press down the terminal Insert the black wire into
tab on the back of the
the black terminal (–) and
speaker.
the gray wire into the gray
(+) terminal, and then
release the tab.
Black
13
Back of the Main Unit
3
Connect the connecting plugs to
the back of the DVD player.
•
Make sure the colors of the speaker terminals
match the colors of the connecting plugs.
Gray

Connecting the Video Out to TV

Choose one of the three methods for connecting to a TV.
Composite Video ............... Good Quality
METHOD 1
Connect the supplied video cable from the VIDEO OUT jack on the back panel of the
system to the VIDEO IN jack on your television.
Scart ............... Better Quality
METHOD 2
If you television is equipped with an SCART input, connect an Scart Jack (not supplied) from the
AV OUT jack on the back panel of the system to the SCART IN jack on your television.
VIDEO SELECT Function
Press and hold VIDEO SEL. button on the remote control for over 5 seconds.
•
"COMPOSITE" or "RGB" will appear in the display.
At this time, press the VIDEO SEL. button shortly to select between "COMPOSITE" and "RGB".
• If Scart (RGB Input) is equipped for your TV, press VIDEO SEL. button to select RGB mode.
You can get a better picture quality by using Scart setting.
•
If Scart (RGB Input) is not equipped for your TV, press VIDEO SEL. button to select COMPOSITE
mode.
Component (Progressive Scan) Video ............... Best Quality
METHOD 3
If your television is equipped with Component Video inputs, connect a component video
cable (not supplied) from the Pr, Pb and Y jacks on the back panel of the system to the
corresponding jacks on your television.
•
When the Progressive scan mode is selected, the VIDEO and SCART outputs
Note
do not feed any signal.
METHOD 2
METHOD 3
METHOD 1
14
GB