Setting The Speaker Mode - Samsung HT-DB770 Instruction Manual

Hide thumbs Also See for HT-DB770:
Table of Contents

Advertisement

33P~74P(DB770)-GB
2004.9.16

Setting the Speaker Mode

1
Press MENU button.
In the Speaker
3
Setup, press the
ENTER button again.
43
9:41 AM
Page 42
Press Cursor
2
button to move to
'Audio' and then
press ENTER button.
Press Cursor
, buttons to move
4
to the desired
speaker and then
press ENTER button.
For C, LS, and RS, each time the button
is pressed, the mode switches
alternately as follows: SMALL
For L and R, the mode is set to SMALL.
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are installed.
Note
With
(Dolby Pro Logic II), the delay time may be different for each
mode.
With AC-3 and DTS, the delay time is set between 00 and 15mSEC.
Depending on PRO LOGIC and STEREO, the speaker mode may vary.
,
,
NONE.

Advertisement

Table of Contents
loading

Table of Contents