Setting The Av Sync; Setting The Hdmi Audio; Listening To Radio; Presetting Stations - Samsung HT-A100 User Manual

system setup

SETTING THE AV SYNC

Video may look slower than the audio if it is connected to a digital TV. If this occurs, adjust the audio delay time to to match the video.
1. In Stop mode, press the MENU button.
Press the Cursor ▼ button to move to Audio and then press the
2.
ENTER or ► button.
Press the Cursor ▼ button to move to AV-SYNC and then press the
3.
ENTER or ► button.
4. Press the Cursor , button to select the AV-SYNC Delay Time and
then press the ENTER button.
•
You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.

SETTING THE HDMI AUDIO

The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1. In Stop mode, press the MENU button.
2. Press the Cursor button to move to Audio and then press the
ENTER or ► button.
3. Press the Cursor button to move to HDMI AUDIO and then press
the ENTER or ► button.
4. Press the Cursor , button to select ON or OFF and then press
the ENTER button.
• ON : Both video and audio signals are transmitted over the HDMI
connection cable, and audio is output through your
TV speakers only.
• OFF : Video is transmitted over the HDMI connection cable only,
and audio is output through the home theater speakers only.
d Press the RETURN button to return to the previous level.
d Press the EXIT button to exit the setup screen.
M

The default setting of this function is HDMI AUDIO OFF.

HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
46
radio

LISTENING TO RADIO

MOVE ENTER RETURN EXIT
MOVE SELECT EXIT
RETURN
MOVE ENTER RETURN EXIT

PRESETTING STATIONS

MOVE SELECT RETURN EXIT
Remote Control
1. Press the TUNER button to select the FM band.
2. Tune in to the desired station.
•
Automatic Tuning 1 : When the #,$ button is
pressed, a preset broadcast station is selected.
•
Automatic Tuning 2 : Press and hold the , , .
button to automatically search for active
broadcasting stations.
•
Manual Tuning : Briefl y press the , , . button to
increase or decrease the frequency incrementally.
Main Unit
1. Press the FUNCTION button to select the FM band.
2. Select a broadcast station.
•
()
Automatic Tuning 1 : Press the STOP button to select PRESET
and then press the #,$ button to select the preset station.
•
Automatic Tuning 2 : Press the STOP () button to
select MANUAL and then press and hold the #,$
button to automatically search the band.
•
Manual Tuning : Press the STOP () button to select
MANUAL and then briefl y press the button to tune in to a lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo. (This applies only when listening to an FM station.)
• Each time the button is pressed, the sound switches between STEREO and MONO.
• In a poor reception area, select MONO for a clear, interference-free broadcast.
Example : Presetting FM 89.10 in the memory
1. Press the TUNER button to select the FM band.
Press the , , . button to select 89.10.
2.
3. Press the TUNER MEMORY button.
•
01 fl ashes in the display.
Press the #,$ button to select preset number.
4.
•
You can select between 1 and 15 presets.
5. Press the TUNER MEMORY button again.
•
Press the TUNER MEMORY button before Number
disappears from the display.
•
Number disappears from the display and the station is
stored in memory.
6. To preset another station, repeat steps 2 to 5.
•
To tune in to a preset station, press the #,$ button on the remote control to select a channel.
M

This unit does not receive AM broadcasts.
47 47