Connecting The Video Out To Your Tv - Samsung HT-A100 User Manual

connections
Connecting The Speakers
1. Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal (–) and the red wire into
the red (+) terminal, and then release the tab.
3. Connect the connecting plugs to the back of the Home Theater.
•
Make sure the colors of the speaker terminals match the colors of
the connecting plugs.
Front Speaker (R)

Do not let children play with or near the speakers. They could get hurt if a speaker falls.

When connecting the speaker wires to the speakers, make sure that the polarity (+/ –) is correct.

Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or
alien substances into the duct (hole) of the subwoofer speaker.

Do not hang the subwoofer on the wall through the duct (hole).
M

If you place a speaker near your TV set, screen color may be distorted because of the magnetic fi eld generated
by the speaker. If this occurs, place the speaker away from your TV set.
18
Black
Red
Front Speaker (L)
Subwoofer

CONNECTING THE VIDEO OUT TO YOUR TV

Choose one of the three methods for connecting to a TV.
METHOD3
(supplied)
METHOD 1 : HDMI
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack
on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a Component video cable(not
supplied) from the Component Video Output (P
Component Video Input jacks on your TV.
METHOD 3 : Composite Video
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the
VIDEO IN jack on your TV.
M

This product operates in Interlace scan mode 576i(480i) for component output.

If you use an HDMI cable to connect a Samsung TV to the DVD Player, you can operate the Home Theater using the TV's
remote control. This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).

Please check the logo (If your TV has an
METHOD2 METHOD1
(supplied)
, P and Y) jacks on the back of the DVD Player to the
R B
logo, then it supports the Anynet+ function.)
19