Graco A Series Manual page 19

NOTE: Step 12 is for returning paint in hose back to
paint pail. One 50-ft hose holds approximately 1-quart
(1-liter) of paint.
12. To preserve paint in hose:
a. Point gun into paint pail.
b. Unlock gun trigger lock.
c. Pull and hold gun trigger.
d. Move Prime/Spray valve to SPRAY.
e. Turn power switch ON.
f. Continue to hold gun trigger until you see paint
diluted with flushing fluid starting to come out of
gun.
13. While continuing to trigger gun, quickly move gun to
redirect spray into waste pail. Continue triggering
gun into waste pail until flushing fluid dispensed
from gun is relatively clear.
WATER or
SOLVENT
3A1782D
ti8909a
ti22207a
ti5580a
WASTE
ti9745a
14. Stop triggering gun. Engage the trigger lock.
15. Turn Prime/Spray valve to PRIME.
16. Turn power switch OFF.
17. Fill unit with Pump Armor™ storage fluid. Read
Long Term Storage, page 21.
Shutdown and Cleaning
ti8908a
ti22202a
ti2018a
19