Table of Contents
Advertisement
Case 2 : Installing on a wall
1.
Insert the Bracket-Set into the bottom slot of the Blu-ray Disc product. Insert the two screws as
shown below, and then turn them clockwise to secure it.
2.
Place the Wall Bracket on the wall so that the arrow side faces upward and use four screws
(not included) to fi x it on the wall. Drive the screws into a stud or into mollies for secure support.
After the Bracket-Set is installed, slide and insert the Blu-ray Disc product into the appropriate
slots of the Wall Bracket.
✎
NOTE
Screws for the wall bracket are not included. Purchase screws (and mollies) appropriate for your type
of wall.
Make sure that the product is installed standing on the ground or hanging on the wall.
Laying down the product on the ground may cause the product malfunction.
HT-D7200_ELS_1227.indd 19
HT-D7200_ELS_1227.indd 19
19
English
2011-12-27
2011-12-27
3:27:54
3:27:54
Hide quick links:
Advertisement
Table of Contents
