System Information; Firmware Upgrade Notification - Samsung BD-P1600A User Manual

`
Do not use USB devices other than USB Flash Drives to do software upgrades using the USB Host jack.
`
There should be only one firmware upgrade file in the USB flash drive for the player to properly perform an
upgrade.
` Oversized USB drives may not be able to be inserted when a LAN or HDMI cable is connected.

SySTeM InFOrMaTIOn

When the firmware upgrade is done, check the firmware details by following the steps below.
1. With the unit in Stop mode/No Disc mode, press the
Menu button.
. Press the enTer or + button.
. Press the ▲▼ buttons to select Setup, then press the
enTer or + button.
. Press the ▲▼ buttons to select System, then press the
enTer or + button.
. Press the ▲▼ buttons to select System Information,
then press the enTer or + button.
You can see detailed information about the current
firmware.
. Press the enTer button to select Ok.
System Setup menu will be displayed.

FIrMWare uPGraDe nOTIFIcaTIOn

The popup menu appears when a newer version of the firmware is available from SAMSUNG update server than
that of the Blu-ray Disc Player, if the Blu-ray Disc Player is connected to the network and powered on.
~ yes : Select this to upgrade now.
no : Select this if you plan to upgrade later.
~
Music
Photo
Setup System
No disc ◄ ►
Language
Audio
Display
HDMI
Network
Parental
Music
Photo
Setup System System Information
No disc ◄
Language
Time Zone
Audio Clock Set
Display Power On/Off sound
HDMI Touch Key Sound
Network BD Data Management
Parental DivX(R) Registration
Music
Photo
System Information
Setup System Information
No disc System Setup
◄
Time Zone
S/W : XXXXXXX
Language
Loader : XXXXXXX
Clock Set
Audio
Region : B/2 (BD/DVD)
Power On/Off sound
Display
Touch Key Sound
HDMI
OK
Network BD Data Management
Parental
DivX(R) Registration
System Update
New Firmware is available.
Do you want to update now?
Yes No
English _
►
: On
: On
►
:
: