Table of Contents
Advertisement
DVD
Choosing a Connection
The following show examples of connections commonly used to connect the DVD -VCR player with
a TV and other components. It is only available for DVD. The VCR out can not watch by this
connection.
GB
Connection to an Audio System
Dolby Digital Decoder
Digital Audio Input Jack
COAXIAL
OPTICAL
or
DIGITAL AUDIO OUT
OPTICAL
DVD-VCR
COAXIAL
Digital Audio out
Jack
44
Connection to an Television
Television
S-Video
Digital
Jack
Video Out
Choosing a Connection
DVI VIDEO Specifications
DVI VIDEO
The button will change color each time it is pressed to indicate the mode. 576p/480p(Red), 720p(Blue) and
1080(Green) modes are supported.
When you press the DVI Video button ; (PAL disc play)
1. The 576p DVI output will be selected when the "Red" light comes on.
2. The 720p DVI output will be selected when the "Blue" light comes on.
3. The 1080i DVI output will be selected when the "green" light comes on.
When you press the DVI Video button ; (NTSC disc play)
1. The 480p DVI output will be selected when the "Red" light comes on.
2. The 720p DVI output will be selected when the "Blue" light comes on.
3. The 1080i DVI output will be selected when the "green" light comes on.
Important Note
• DVI (Digital Visual Interface)
DVI is an interface to enable the digital transmission of video signals between various digital devices.
Using DVI, the DVD player transmits a digital video signal and displays a vivid picture on a TV having a DVI jack.
• Description of the DVI connection DVI-D connector : digital signal only.
DVI-I connector : digital and analog signal.
• Though the player is using DVI-I connector, the output from a DVI-I is only a digital signal.
• If TV does not support HDCP (High-bandwidth Digital content protect), snow noise appears on the screen.
• Be careful that various connectors are similar to DVI connector, for example VESA PnD, VESA DFD and so on.
• Why we adopt DVI?
Generally, with an analog TV, an analog video signal is input to VIDEO IN.
However, when playing a DVD title the data transmitted to a TV is digital. Therefore either a digital-to- analog
converter(in the dvd player) and an analog-to-digital converter (in the TV) is required. During this conversion, the
picture quality is degraded due to noise and loss of signal.
DVI technology requires no D/A conversion and DVI is a pure digital signal from the player to your TV.
• What is the HDCP?
HDCP(High-bandwidth Digital Content Protection) is a system for protecting DVD content outputted via DVI from
being copied. It provides a secure digital link between a video source(PC, DVD. etc) and a display device(TV,
projector . etc). Content is encrypted at the source device to prevent unauthorized copies from being made.
DVD
GB
45
Advertisement
Table of Contents
