Nicam; Intelligent Picture Control - Samsung SV-DVD545 User Manual

NICAM

NICAM programmes are divided into 3 types. NICAM
Stereo, NICAM Mono and Bilingual (transmission in
another language).
NICAM programmes are always accompanied by a
standard mono sound broadcast and you can select the
desired sound. Please refer to page 24.
1
After pressing the MENU, press the OK or
Result: The Setup menu is displayed.
2
Press the corresponding
the User Set option.
❿
3
Press the OK or to select this option.
Result: The User Set menu is displayed.
(SV-DVD540/SV-DVD545)
Colour System
NICAM
IPC
VideoPlus Extend
(SV-DVD440)
Colour System
NICAM
IPC
4
Press the corresponding
NICAM option is selected.
5
To... Press OK or
Mono mode Off is displayed.
Off: Only set at this position to
record the standard mono
sound during a NICAM
broadcast if the stereo
sound is distorted due to
inferior reception conditions.
NICAM mode On is displayed.
On: Normally set at this
position.
6
On completion, press RETURN three times to exit
the menu.
❿
.
,
buttons to select
❷
User Set
: Auto
On
: On
Off
: On
: Off
User Set
: Auto
: On On
Off
: On
,
buttons, until the
❷
❿
, until...

Intelligent Picture Control

The Intelligent Picture Control Feature allows you to
adjust the sharpness of the image automatically,
according to your own preferences.
1
During playback, press the MENU button on the
remote control.
Result: The Setup menu is displayed.
2
Press the OK or
Result: The Setup menu is displayed.
3
Press the corresponding
the User Set option.
4
Press the OK or
Result: The User Set menu is displayed.
(SV-DVD540/SV-DVD545)
Colour System
NICAM
IPC
VideoPlus Extend
(SV-DVD440)
Colour System
NICAM
IPC
5
Press the corresponding
IPC option is selected.
6
Press the OK or
(intelligent picture control) option.
When intelligent picture control mode is ON, the
sharpness of the image is adjusted
automatically.
7
To adjust the sharpness manually, press the
button to turn the IPC mode OFF.
➛ ❿
8
Press the ,
displayed according to your preferences.
If you do not press a button within ten seconds,
the PICTURE menu disappears automatically.
9
On completion, press the RETURN button again.
ENG-17
❿
.
,
buttons to select
❷
❿
buttons to select this option.
User Set
: Auto
: On
On
: On
Off
: Off
User Set
: Auto
: On
On
: On
Off
,
buttons, until the
❷
❿
buttons to select the IPC
buttons until the picture is
❷