Samsung DVD-VR300E Instruction Manual page 69

Press the OK button.
3
• The information concerning the programme is
displayed.
• When using the Videoplus+ function for the
first time with stored stations, the programme
number flashes. On the first occasion, you
must enter
the station number manually by pressing the
❷
buttons.
DVD-RAM(VR)
No
To PR No.01
01
To DVD
02
Day TUE 13
03
04 08 : 20
Start
05
SP
Speed
06
DVD-RAM(VR)
TUE 13 08:20
Refer to the following page if:
• The programme number or times flash
• You wish to modify the programme
If the programme and times are correct, press
4
the OK button.
Press the STANDBY/ON button to activate the
5
timer.
Refer to page 73~74 if you wish to:
6
• Check that your DVD Recorder-VCR has been
programmed correctly
• Cancel a preset recording
Scheduled Record List
End Speed V/P Edit
Start
PR
01
10 : 20
End
Off
VPS/PDC
Scheduled Record List
10:20
The numbers next to each TV programme list-
ing are Videoplus+ code numbers, which
Note
allow you to programme your DVD Recorder-
VCR instantly with the remote control. Tap in
the Videoplus+ code for the programme you
wish to record.
Videoplus+ is a trademark of Gemstar
Development Corporation. The Videoplus+
system is manufactured under licence from
Gemstar Development Corporation.
English - 69