Plug & Auto Setup - Samsung DVD-VR300E Instruction Manual

Plug & Auto Setup
The DVD Recorder-VCR will automatically set itself up
when it is plugged into the mains for the first time.
TV stations will be stored in memory. The process takes
a few minutes. The DVD Recorder-VCR will then be
ready for use.
Connect the RF cable as indicated on page 16.
1
• Connecting Your DVD Recorder-VCR to the TV
using the RF Cable.
Plug the DVD Recorder-VCR into the mains.
2
• "Auto" in the front panel display flickers.
Start the auto setup.
3
24 - English
Start the auto scanning.
4
Wait current time and date are displayed
5
automatically.
Check the date and time.
6
• if it is: Correct
Press OK button then the data and time
will be saved.
• if it is: Incorrect
Refer to "Seting the Date and Time"
menu, when you want to change the date
and time.