Download Print this page

Troubleshooting - Samsung DVD-VR300E Instruction Manual

Dvd recorder-vcr
Hide thumbs Also See for DVD-VR300E:

Advertisement

Troubleshooting

You cannot use the operation or function due to one of the following reasons:
icon appears on the
(1) Your DVD disc does not support the feature (for example, angles)
screen.
(2) You've requested a title, chapter, or scan time that is out of the correct range.
Play mode settings are
The disc does not support all the selected functions.
different from the settings
In this case, some settings you configure on the Setting menu may not work properly.
configured with the
Setting menu.
Cannot change the
Aspect ratio is fixed for DVD disc.
aspect ratio.
No audio output.
Check whether you selected correct digital output options in the Audio Output Options menu.
No video or audio output.
Did you move your DVD Recorder-VCR suddenly from a cold place to a warm place? In this case, remove discs and wait for one to
The disc tray is ejected
two hours with the power on, and then, insert the disc and try to playback again. It will work properly when condensation is removed.
after 2 to 5 seconds.
Angle operation does not
Angle operation is available only when the disc contains the images captured at different angles.
work during playback of a
DVD disc.
• Check whether there is damage or foreign materials on your disc.
The disc revolves, but
• Some discs with bad manufacturing quality may not be played back.
no image or bad quality
• If the scene changes from dark to bright suddenly, the screen may jitter temporarily, but it is not a defect.
images are output.
Desired sound language
Sound languages and subtitle languages are disc-specific. Only the sound and subtitle languages contained on a DVD disc are
and subtitle language are
available and displayed on the disc menu.
not played.
• Point the remote control at the remote control sensor on your DVD recorder-VCR. Operate within distance. (15ft)
The remote control
Remove obstacles between your DVD Recorder-VCR and remote control.
doesn't work.
• Check whether the batteries are depleted.
• Read the table of contents and then find and read the sections describing your problem, and follow the directions given.
Other problems
• Turn the unit off and on.
• If your problem still persists, contact your nearest Samsung service center.
12

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Dvd-vr300