Storing The Channels Automatically - Samsung CS-21A11MH Owner's Instructions Manual

ENG
œ œ
Mode
Adjust
Digital NR
Tilt
Select Enter
Auto Store
Manual Store
Add/Erase
Fine Tune
Sort
Select Enter
P 1
471 MHz
Exit
Sort
From
To
Store
Select Adjust

Storing the Channels Automatically

Picture
√
Custom
√
: Off
: 0
Exit
Channel
√
√
√
√
√
Exit
48 %
Channel
: P 1
: P--
: ?
Exit
14
You can scan the frequency ranges available on your television and
in your country and store all the channels found automatically.
The channels are stored in the order in which they appear in the
frequency bands. It is possible that the automatically allocated
numbers may not correspond to those by which you wish to
identify the channels. If this is the case, refer to "Sorting the Stored
Channels" on page 19.
1
Press the MENU button.
2 Press the ▲ or ▼ button to select the
3
Press the œ or √ button to select the
4
Press the œ or √ button again.
Result: The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range. Finally, the search will end automatically.
5
When searching and storing is complete, the
displayed.
To...
Sort the stored channels
into the desired numerical order
Exit the channel store function
without sorting the channels
➣
If sound does not work regularly after storing channels, select
the sound system which best corresponds in Manual Store
menu (refer to page 16~17).
.
Channel
.
Auto Store
menu is
Sort
Then...
Go to Step 4 of the "Sorting
the Stored Channels"
procedure on page 19.
Press the MENU ( )
button repeatedly until the
menus isappear.