Setting Up Anynet; Switching Between Anynet+ Devices - Samsung PS50B850Y1W User Manual

Setting Up Anynet+


Option
Setup
Switching between Anynet+
Devices
1
Press the TOOLS button. Press the ENTERE button to select
Anynet+ (HDMI-CEC).
2
Press the ▲ or ▼ button to select Device List, then press the ENTERE button.
■ Anynet+ devices connected to the TV are listed. If you cannot find a device
you want, press the red button to scan for devices.
■ Only when you set Anynet+ (HDMI-CEC) to On in the Setup menu, the
Device List menu appears.
3
Press the ▲ or ▼ button to select to a particular device and press the ENTERE
button. It is switched to the selected device.
■ Switching to the selected devices may take up to 2 minutes. You cannot
cancel the operation during the switching operation.
■ The time required to scan for devices is determined by the number of
connected devices.
If you have selected external input mode by pressing the SOURCE button,
■
you cannot use the Anynet+ function. Make sure to switch to an Anynet+
device by using the Device List.
Description
Anynet + (HDMI-CEC) → Off / On
■
To use the Anynet + Function, Anynet + (HDMI-CEC) must
be set to On.
When the Anynet + (HDMI-CEC) function is disabled,
•
all the Anynet + related operations are deactivated.
■ Auto Turn Off → → No / Yes
Setting an Anynet+ Device to turn Off automatically when
the TV is turned Off.
•
The active source on the TV remote must be set to
TV to use the Anynet + function.
•
If you set Auto Turn Off to Yes, connected external
devices are also turned off when the TV is turned off.
If an external device is still recording, it may or may
not turn off.
■ Press the TOOLS button to
display Tools menu.
You can also display Anynet+
menu by selecting Tools →
Anynet+(HDMI-CEC).
Anynet+(HDMI-CEC) : On
Auto Turn Off : Yes
Move Enter
U E
View TV
Device List
Recording : DVDR
DVDR MENU
DVDR INFO
Receiver : On
Setup
Move Enter
U E
▶
Return
R
Return
R