1
Introduction
In this chapter, you will learn what information is required to create the pages on the
NA-series PTs while confirming the contents included in this guide. You will also learn the
system configuration required and the procedure for creating pages.
1-1 Overview
1-1-1 Overview
As summarized below, this guide explains the procedures to perform settings of the NA
series, to create basic pages, and to transfer them to the actual unit.
1.Creating Projects
・Creating a Project
・Registering Global Variables
・NA Communication Settings
・Registering Variables
2.Creating Basic Pages
・Adding Pages
・ON/OFF Switches
・Bit Lamps
・Labels
・Off-line Testing
・Button to Switch Pages
・Data Edit/Display
・Gauges (Graphs)
・Alarms
・PDF Display
・Video Display
・Integrated Simulation
3.Check on Actual Unit
・Synchronization
・Operation
8