BN68-00653C-00Eng
4/6/04 3:33 PM
Initializing the Image Settings
You can replace all image settings with the factory default values.
Press the PC button on the remote control to select the PC mode.
Press the MENU button.
1
Result:
The main menu is displayed.
Press the
or
2
Press the ENTER
Press the
or
3
Press the ENTER
Result:
The options available in the PC Setup menu are
displayed.
Press the
or
4
Press the ENTER
Result:
You can initialize all image settings (Image Lock,
Position) to the factory default values.
Page 49
button to select Setup.
button.
button to select PC Setup.
button.
button to select Image Reset.
button.
English-49