Switching On And Off; Placing Your Television In Standby Mode - Samsung LW32A33W Owner's Instructions Manual

BN68-00653C-00Eng 4/6/04 3:30 PM

Switching On and Off

The mains lead is attached to the rear of your set.
If you have purchased this set in the United Kingdom,
refer to page 61 for further instructions on plug wiring.
1
Plug the mains lead into an appropriate socket.
Result: The main voltage is indicated on the rear of your set and
the frequency is 50 or 60Hz.
2
Press the POWER ( ) button on the right-side of your set.
Result: The standby indicator right on the front panel.
3
Press the numeric button (0~9) or channel up/down (
on the remote control or
the right-side of your set.
Result: The programme that you were watching last is reselected
automatically.
When you switch the set on for the very first time, you will be
asked to choose language in which the menus are to be
displayed (see page 14).
4
To switch your set off, press the POWER ( ) button again.

Placing Your Television in Standby Mode

Your set can be placed in Standby mode, in order to reduce the power
consumption. The Standby mode can be useful when you wish to
interrupt viewing temporarily (during a meal, for example).
1
Press the POWER ( ) button on the remote control.
Result: The screen is turned off and a orange standby indicator
appears on the front of your set.
2
To switch your set back on, simply press the POWER ( ), numeric
buttons (0~9) or channel up/down (
Do not leave your set in Standby mode for long periods of time (when
you are away on holiday, for example).
Turn your set off by pressing the POWER (
of the set.
It is best to unplug the set from the mains and aerial.
1. Use of the 'POWER
the TV is in 'Power Saving' (standby) mode. If the TV is powered off,
the remote cannot be used to turn the TV on.
2. To retain the time and or automatic alarm settings, always put the TV
in stand-by mode with the remote control. Use of the the power switch
on the TV will clear all time related settings. [Benefit] This full 'power
off' function is as effective as unplugging the power cable.
TV switches to standby mode when powered off by the remote control.
To return power (
channel button( ). Pressing the power button on the TV does not
return power to the screen because in this case, the TV restores the
last mode, which was 'Power Saving'.
Page 11
C/P. button on
/ ) button again.
) button on the
( ) ' button on the remote is possible only when
) to the screen, press the remote control 'ON' or
/ ) button
right-side
English-11