Advertisement
SSP4224-LRDDS7135-LRDRT4724-VRDDS7135-VRDTR4724 - INSTRUCTIONS
You will need a Phillips Head Screwdriver and a Rubber Mallet to Assemble.
STEP 3a : Screw 3 cam pins(C) into Modesty(H).
STEP 3b : Attach desk top(F) to modesty(H) and right leg(E1) by inserting cam pins(C) into locks and tightening (See Fig. 1a).
You may need to move the leg's(E) cam pins(C) out of the locks on modesty(H) from step 2 to fit the desk top in snugly
H
C
STEP 4a : Attach left leg(E2) by inserting
cam pins(C) into locks and tightening. (See Fig. 1a)
STEP 4b : Attach 4 corner brackets(A) to bottom of desk
with 6 small screws(B) each. Place them in the
locations shown on the image below.
A
E
A
You will need 2 person(s) for this assembly.
E
C
C
A
F
E
A
H
Any problems or questions call Regency Office Furniture at 1-866-816-9822
STEP 5 : Attach 3 cam pins(C) to transaction top(G) then
attach transaction top to desk by inserting cam pins(C) into
locks and tightening (See Fig. 1a). Secure top to desk by
attaching last 2 corner brackets(A) to the underside of the
transaction top and sides with 6 screws(B) each bracket.
C
G
C
C
.
F
E
H
Advertisement
