Checking the Digital-Signal Information
You can get information about the signal status.
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER
button.
2.
Press the ▲ or ▼ button to select "Signal Information", then press the
ENTER
button.
3.
Press the EXIT button to exit.
If the signal status is poor, the "No signal." message is displayed.
➣
While viewing a Digital channel, this function can be selected.
➣
LNA (Low Noise Amplifier)
If the TV is operating in a weak-signal area, the LNA function can improve the reception (a low-noise preamplifier boosts the
incoming signal).
1.
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select "Channel", then press the ENTER
button.
2.
Press the ▲ or ▼ button to select "LNA", then press the ENTER
3.
Press the ▲ or ▼ button to select "Off" or "On". Press the ENTER
4.
Press the EXIT button to exit.
While viewing an Analogue channel, this function can be selected.
➣
button.
button.
English -
Channel Mode
: Added Ch.
Fine Tune
Signal Information
LNA
: Off
Signal Information
Frequency
: 482000 KHz
Service ID
: 0401
Multiplex
: (TSID 0004, ONID 20fa)
Network
: (ID 20fa)
Bit error level
Signal Strength
OK
Enter
Fine Tune
Signal Information
LNA
:
Off
Fine Tune
Signal Information
LNA
:
On
Off
On
►
0
88
Return
►
►