Fine Tuning Analogue Channels; Checking The Digital-Signal Information - Samsung LE26A466C2M User Manual

Fine Tuning Analogue Channels

1.
Use the number buttons to ��irectly select the channel that you want to fine
tune.
2.
Press the MENU button to ��isplay the menu. Press the �� or �� button to
select "Channel", then press the ENTER
3.
Press the �� or �� button to select "Fine Tune", then press the ENTER
button.
4.
Press the �� or �� button to a��just the fine tuning. Press the ENTER
button.
5.
Press the EXIT button to exit.
Fine tuned channels that have been saved are marked with an asterisk "*"
➣
on the right-hand side of the channel number in the channel banner.
To reset the fine-tuning, select "Reset" by pressing the �� or �� button an��
➣
then press the ENTER
Only Analogue TV channels can be fine tune��.
➣

Checking the Digital-Signal Information

You can get information about the signal status.
1.
Press the MENU button to display the menu.
Press the �� or �� button to select "Channel", then press the ENTER
button.
2.
Press the �� or �� button to select "Signal Information", then press the
ENTER button.
3.
Press the EXIT button to exit.
If the signal status is poor, the "No signal." message is displayed.
➣
While viewing a Digital channel, this function can be selected.
➣
button.
button.
English - 
Channel Mode : Added Ch.
Child Lock : On
Fine Tune
Signal Information
LNA : Off
Fine Tune
ATV 6 *
Reset
Move Adjust Save
Child Lock : On
Fine Tune
Signal Information
LNA : Off
Signal Information
Service ID : 0401
Multiplex : (TSID 0004, ONID 20fa)
Network : (ID 20fa)
Bit error level
Signal Strength
OK
Enter
►
Fine Tuned
+ 3
Return
►
0
88
Return