Listening To The Sound Of The Sub Picture; Setting The Time; Setting And Displaying The Current Time; Setting The Sleep Timer - Samsung LE27T51B Owner's Instructions Manual

Listening to the Sound of the Sub Picture

SETTING THE TIME

Setting and Displaying the Current Time

Setting the Sleep Timer

Press the SLEEP button on
the remote control repeatedly
until the appropriate time
interval appears.
During the PIP feature is activating, you can listen to the sound of the
sub picture.
1. Press the MENU button to display the menu. Press the
select "Sound", then press the ENTER
2. Press the or
ENTER button.
3. Press the or
4. Press the EXIT button to exit.
Main: Used to listen to the sound of the main picture.
Sub: Used to listen to the sound of the sub picture.
You can select this option when the "PIP" is set to "On".
You can set the TV's clock so that the current time is displayed when
you press the INFO button. You must also set the time if you wish to
use the automatic On/Off timers.
1. Press the MENU button to display the menu. Press the
select "Setup", then press the ENTER
2. Press the or
3. Press the ENTER
4.
To...
Move to "Hour" or "Minute"
Set the "Hour" or "Minute"
Press the ENTER
5. Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
You can select a time period of between 30 and 180 minutes after which
the television automatically switches to standby mode.
1. Press the MENU button to display the menu. Press the
select "Setup", then press the ENTER
2. Press the or
3. Press the or
ENTER button.
4. Press the or
(Off, 30, 60, 90, 120, 150, 180) Press the ENTER
5. Press the EXIT button to exit.
The TV automatically switches to standby mode when the timer reaches 0.
English-13
button to select "Sound Select", then press the
button to select "Sub". Press the ENTER
button to select "Time", then press the ENTER
button to select "Clock Set".
button.
button to select "Time", then press the ENTER
button to select "Sleep Timer", then press the
button repeatedly until the desired time appears.
or button to
button.
button.
or button to
button.
Press the...
or button.
or button.
or button to
button.
button.
button.
button.