Install The Seat - Honda ST1300 2003 Setup Instructions

17. Install the seat.

Insert the prong into the recess under the frame cross
member, then push down on the rear of the front seat.
Insert the prong into the recess under the frame cross
member, then push down on the rear of the rear seat.
Close the latch lever and turn the ignition
key counterclockwise.
Be sure the seats are locked securely in position.
Replace the ignition key.
©2003 American Honda Motor Co., Inc. - All Rights Reserved
FRONT SEAT
REAR SEAT
LATCH LEVER
IGNITION
KEY
IGNITION KEY
13