Bradford White EF100T150(E)*(N Service Manual page 23

7. Software Version (Display only)
8. Error Code History (Displays if there are present error codes or up to 10 previous error codes). Water Heater
Display will show a "--" if there are no error codes.
To change the Maximum Setpoint Limit (Max Setpoint) for the temperature setpoint:
Step 1: In service mode press the "Select" button until "Max Setpoint" is displayed.
WARNING
Setting the water temperature
to the maximum set point can
result in scalding hot water
delivered to the faucets. It is
highly recommended that the
maximum setpoint be adjusted
to the lowest temperature
possible for the needs of the
installation. Make sure the
water heater control display is
not in a public area that can
r e s u l t i n t h e t e m p e r a t u r e
sett ings being improperly
adjusted.
For models with Honeywell Integrated Control
idle
Status Operational
&
SELECT
idle
Status Operational
SELECT
°F
idle
Status Operational
&
SELECT
Accessing Service Mode on Control Display
Soft
SET
SET
Max
Setpoint
SET
23
23