Setting The Network; Network Type - Samsung UE32B7000WW User Manual

Setting the Network

Option

Network Type

Network Setup
When unable to connect to a wired network
If your Internet service provider has registered the MAC address of the device used to
connect to the Internet for the first time and authenticates the MAC address each time you
connect to the Internet, your TV may not be able to connect to the Internet as the MAC
address differs from that of the device (PC).
In this case, ask your Internet service provider about the procedures to connect devices
other than your PC (such as your TV) to the Internet. If your Internet service provider
requires an ID or password to connect to the Internet (network), your TV may not be
able to connect to the Internet. In this case, you have to enter your ID or password when
connecting to the Internet using an Internet Sharer (Router).
The internet connection may fail due to a firewall problem. In this case, contact your
Internet service provider. If you cannot connect to the Internet even if you have followed
the procedures of your Internet service provider, please contact Samsung Electronics.
Setup
Description
Select Cable or Wireless as the method to connect to the
network.
■ Cable
Connect to the network using a cable.
■ Wireless
Connect to the network wirelessly.
Cable Network Setup
❑
(when Network Type is set to Cable)
■ Please check if the LAN cable is connected.
•
Internet Protocol Setup → Auto / Manual
• Network Test: You can test or confirm the network
connection status after setting up the network.
Cable Network Setup-Auto
If you connect the LAN cable and it supports DHCP, the
Internet Protocol (IP) Settings are automatically configured.
1. Set Network Type to Cable.
2. Select Cable Network Setup.
3. Set Internet Protocol Setup to Auto.
■ The Internet Protocol is set automatically.
4. Select Network Test to check the network connectivity.
Broadcast
Security
Network
General
■ The menu is activated only if the
'Samsung Wireless LAN Adapter'
is connected.
Cable Network Setup
Internet Protocol Setup : Auto
Network Test
IP Address :
Subnet Mask :
Gateway :
DNS Server :
U Move E Enter R Return

▶
▶