Getting Started
Installing the Stand
■
Preset: Place the Guide Stand and Cover Neck onto the stand and fasten it using the screws.
Applicable to models (UE32B7000, UE32B7020) only.
1
Attach your LED TV to the stand.
■
Two or more people should carry the TV.
■
Make sure to distinguish between the front and back of the stand when assembling
them.
■
To make sure the TV is installed on the stand at a proper level, do not apply excess
downward pressure to the upper left of right sides of the TV.
2
Fasten screws at position 1 and then fasten screws at position 2.
■
Stand the product up and fasten the screws. If you fasten the screws with the LED
TV placed down, it may lean to one side.
■
The stand is installed for models with the screen size of 37 inch and above.
Disconnecting the Stand
1
Remove four screws from the back of the TV.
2
Separate the stand from the TV.
■
Two or more people should carry the TV.
3
Cover the bottom hole with the cover.
1
2
Front
2
1
3
Back