Table of Contents
Advertisement
Default type: set the default message type. The
network can convert messages into the selected
format.
Name: enter a profile name.
•
Sending options: set up the options for sending
SMS messages:
Reply path: allow recipients to reply to you
through your SMS server.
Delivery report: set the network to inform you
when your messages have been delivered.
Network selection: select either CS (GSM) or PS
(GPRS), depending on your network.
Keep a copy: leave copies of your messages in
the Sentbox folder after sending.
Character support: select a character encoding
type. If you select Automatic, the phone switches
the encoding type from GSM alphabet to Unicode if
you enter a Unicode character. Use of Unicode
encoding will reduce the maximum number of
characters in a message to about half. If this menu
is not shown, your phone provides automatic
character encoding by default.
Multimedia message
You can configure MMS settings.
•
Sending options: set up the options for sending
MMS messages:
Priority: set the priority level of messages.
Validity period: set the length of time messages
are stored in the MMS server.
Delivery time: set a time delay before messages
are sent.
Hide address: set your address to be hidden from
the recipient's phone.
Delivery report: set the network to inform you
when your messages have been delivered.
Read report: send a read-reply request along
with your messages.
Keep a copy: leave copies of your messages in
the Sentbox folder after sending.
•
Receiving options: set up the options for
receiving MMS messages:
(Menu 5.0.2)
57
Advertisement
Table of Contents
