Table of Contents
Advertisement
Browser
When the bearer is set to GPRS:
IP address: enter the WAP gateway address
required to connect to the Internet.
User name: enter the User ID required to connect
to the GPRS network.
Password: enter the password required to connect
to the GPRS network.
APN: enter the access point name used for the
address of the GPRS network gateway.
When the bearer is set to Data:
IP address: enter the WAP gateway address
required to connect to the Internet.
Login name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up number: enter the PPP server phone
number.
Data call type: select a data call type; Analogue
or ISDN.
Note: The WAP browser settings may vary, depending
on the service provider. Contact your service
provider for further details.
Clear cache
You can clear the information stored in the cache,
the phone's temporary memory in which the most
recently accessed Web pages are stored.
Press the Yes soft key or
deletion. Otherwise, press the No soft key.
92
(Menu 4.5)
key to confirm the
Advertisement
Table of Contents
