Table of Contents
Advertisement
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the
word you want to add, press the 0 key or the
Down key to display the alternative words.
2. When you press the 0 key or the Down key at
the last alternative word, the display shows Add
on the bottom line. Press the Add soft key or
key.
3. If necessary, clear the word using the C key and
enter the word you want to add using Alphabet
mode. See page 50.
4. Press the Ok soft key.
The word is added to the T9 dictionary and
becomes the first word for the associated
keypress series.
Note: This feature may not be available for some
languages.
• To enter periods, hyphens, or apostrophes, press
the 1 key. T9 mode applies grammar rules to
ensure that the correct punctuation is used.
• To shift case in T9 mode, use the
are three cases; Initial Capital (
(
), and Lower case (
• You can move the cursor by using the Left and
Right keys. To delete letters, press the C key.
Press and hold the C key to clear the display.
key. There
), Capital lock
).
Entering text
49
Advertisement
Table of Contents
