Frontlightgroup - PIAGGIO X8 125 Manual

12V - 2W warning light bulbs
Application: Lights - High-beam
lights
Quantity: 1
Type: ALL GLASS
Application: Engine oil pressure -
Fuel reserve - Helmet
compartment light
Quantity: 3
Application: Turn indicators
Quantity: 2

Frontlightgroup (03_28, 03_29, 03_30)

To remove the rear light assembly, proceed as follows:
1. Remove the mirror cover, fastened by the two top screws and retained by the lower
rubber ring joining it to the lower fairing;
2. Remove both driving mirrors by loosening the fixing screws "A" on the right and left
hand-side;
3. Loosen the four fixing screws "B" and then remove the headlight cover;
4. Extract the headlight from it housing by loosening the three fixing screws "D";
03_28
To reassemble, repeat the operation in the reverse order.
61