Lennox Comfort Series Owner's Manual page 10

Operation of Remote Controller
1
ON/OFF :
Press this button to turn on the unit. Press this button again to turn off the unit.
2 MODE :
Each time you press the button, a mode is selected in a sequence that goes from AUTO,
COOL, DRY, FAN,and HEAT
*Note: Only for models with heating function.
:
3
-
Press this button to decrease set temperature. Hold it down for above 2 seconds to
rapidly decrease set temperature. In AUTO mode, set temperature is not adjustable.
:
4
+
Press this button to increase set temperature. Hold it down for above 2 seconds to
rapidly increase set temperature. In AUTO mode, set temperature is not adjustable.
:
5
FAN
This button is used for setting Fan Speed in the sequence that goes from AUTO,
to
,
:
6
SWING
Press this key to activate or deactivate the swing.
7 SLEEP:
Press this button to go into the SLEEP operation mode. Press it again to cancel this function.
This function is available in COOL, HEAT (Only for models with heating function) or DRY
mode to maintain the most comfortable temperature for you.
Remote controller description
* , as the following:
AUTO COOL DRY
, then back to Auto.
Auto
Speed 1 Speed 2
- 8 -
*
FAN HEAT
Speed 3
,
Speed 4