The following table describes the labels in this screen.
LABEL
The default action
Should packets that do not match the following rules be blocked or forwarded? Make your choice
for packets not
from the drop down list box. Note that "block" means the firewall silently discards the packet.
matching following
rules
Default Permit Log
Click this check box to log all matched rules in the Access Control List (ACL) default set.
The following read-only fields summarize the rules you have created that apply to traffic traveling in the selected packet
direction. The firewall rules that you configure (summarized below) take priority over the general firewall action settings
above.
No.
This is your firewall rule number. The ordering of your rules is important as rules are applied in
turn. The Move field below allows you to reorder your rules.
Prestige 202H Plus Quick Start Guide
Figure 5 Rule Summary
Table 2 Rule Summary
20
DESCRIPTION