Figure 272 Ip Routing Policy Example; Figure 273 Applying Ip Policies Example - ZyXEL Communications Prestige 662H Series User Manual

Prestige 662H/HW Series User's Guide
3 Create a rule in menu 25.1 for this set to route packets from any host (
means any host) with protocol TCP and port FTP access through another gateway
(192.168.1.100).

Figure 272 IP Routing Policy Example

Gateway addr =192.168.1.100
4 Check Menu 25.1 — IP Routing Policy Setup to see if the rule is added correctly.
5 Apply both policy sets in menu 3.2 as shown next.

Figure 273 Applying IP Policies Example

429
Menu 25.1.1 - IP Routing Policy
Policy Set Name= set2
Active= Yes
Criteria:
IP Protocol = 6
Type of Service= Don't Care
Precedence = Don't Care
Source:
addr start= 0.0.0.0
port start= 0
Destination:
addr start= 0.0.0.0
port start= 20
Action= Matched
Type of Service= No Change
Precedence = No Change
Press ENTER to Confirm or ESC to Cancel:
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP Setup
DHCP= Server
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 64
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
Remote DHCP Server= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
IP Policies= 1,2
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
Packet length= 10
Len Comp= N/A
end= N/A
end= N/A
end= N/A
end= 21
Log= No
Chapter 43 IP Policy Routing
IP=0.0.0.0