Example 1: Internet Access Only; Example 2: Internet Access With An Inside Server; Figure 165 Nat Example 1; Figure 166 Menu 4 Internet Access & Nat Example - ZyXEL Communications PRESTIGE 660H Series User Manual

29.5.1 Example 1: Internet Access Only

In the following Internet access example, you only need one rule where your ILAs (Inside
Local addresses) all map to one dynamic IGA (Inside Global Address) assigned by your ISP.

Figure 165 NAT Example 1

Figure 166 Menu 4 Internet Access & NAT Example
From menu 4, choose the SUA Only option from the Network Address Translation field.
This is the Many-to-One mapping discussed in
read-only option from the Network Address Translation field in menus 4 and 11.3 is
specifically pre-configured to handle this case.

29.5.2 Example 2: Internet Access with an Inside Server

Chapter 29 Network Address Translation (NAT)
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= RFC 1483
Multiplexing= LLC-based
VPI #= 8
VCI #= 35
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
My Login= N/A
My Password= N/A
ENET ENCAP Gateway= N/A
IP Address Assignment= Static
IP Address= 0.0.0.0
Network Address Translation= SUA Only
Address Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
Prestige 660H/HW Series User's Guide
Section 29.5 on page 275. The SUA Only
276